与今日招聘企业随时沟通
与今日招聘企业随时沟通
1. Develop, implement, deploy and manage Control Plans to ensure the reliability of the processes and product.
2. Ensure that all applicable standards of quality are known, understood, implemented and are aligned to meet customer specific requirements.
3. Sets and monitors SPC data to ensure delivery of consistent quality from suppliers or to customers.
4. Leads and follows-up responds to customer concerns with regards to quality.
5. Plans and coordinates the preparation and submission of PPAP documents.
6. Participate in the checking fixture and holding fixture buyoff.
7. Assists with PFMEAs and APQP activities.
8. Participate in the APQP gate reviews, technical reviews etc. and report on the status of plant activities.
9. Leads and follows-up the PPAP document checklist.
10. Maintain Lessons learned data bases to provide feedback for projects and processes.
11. Assists in the development of standardized work processes and process improvements.
12. Leads and follows-up with execution and timing of the pre-production build quality requirements.
13. Sets standards for determining non-conforming materials and scrap review.
14. Establish a robust corrective process throughout the product delivery process;
15. Initiate action to prevent the occurrence of product non-conformity and system deficiency;
16.Seek opportunities for continuous improvement through the application of lean manufacturing techniques;
17. Conducts root cause analysis for any failure at customer side, and assist responsible department to define preventive
岗位职责:
1、接收客诉反馈,组建客诉团队分析并解决客诉问题; 2、客户退货产品的统计分析,协同相关部门制定对应改善方案,跟踪改善的实施及验证 3、负责对外回复报告的整理,输出8D报告,对外解决客诉 4、客诉分类及责任认定 5、协同相关部门做客诉平行问题调查及整改跟进,推进质量改进 6、定期评审客诉并组织客诉会议,总结经验教训,问题平行展开 7、大客户审计准备及内部问题整改跟进,了解客户关注点及相关行业体系的要求,促进质量标准与客户特殊要求的导入 8、参与公司内部产品质量改善活动; 9、提交周/月报告及改善成果;
任职要求:
1.本科及以上学历(或经公司评审达到同等水平); 2.机械、电气最佳,3年及以上工作经验; 3.执行力强、细致严谨、责任心强、具有良好的团队合作意识; 4.精通质量管理,熟练掌握质量管理工具; 5.具有较强的独立工作能力; 6.能看懂英文资料,同时具备一定的书写能力。
工作内容:
1、负责制定和实施制程质量计划,以确保产品的制程质量达到规定标准;
2、负责监控和分析过程中的质量问题,并采取相应的纠正措施;
3、分析和解决质量问题,定责与追踪验证
4、为产线操作人员提供技术支持和质量标准培训
1:分管巡检员和CSL1的检验人员。 2:每天收集巡检员和CSL1每天的质量问题记录,对其进行分析。协助质量部长与相关的车间主管对问题进行分析,找到解决办法。 3:制定可行的质量管理规范,办法。以对车间的质量问题进行有效的管控。 4:监控各生产车间质量控制文件等执行情况,适时更新相关的文件,保证文件的有效性和执行效果。 5:对每个产品,尤其是出现的批量质量问题进行管控,并完成问题产品的PDCA,制定行动计划,以杜绝此类事故的重复发生。 6:督促所辖的巡检员和CSL1人员对所有发出产品的质量实施质量管控。对发货产品进行抽检并盖章,确保发出的产品质量合格。 7:对所有有关零件的质量问题到客户处沟通和交流,签署极限样件。 8:能熟练地使用所有的质量控制5大工具。确保按程序进行质量管控。 9:汇总当周发生的质量问题,核对分析质量统计报表,以备每周的质量例会使用。文件***用POWER POINT 的格式。 10:负责收集当天发生的质量问题案例,并协助质量部长召开QRQC会议和质量例会。 11:带领其团队协同作战,并附有培训其部下的职责。 12:在质量部需要临时安排其他岗位工作时,需要无条件服从 任职要求 1、大专以上学历(机械等相关专业,熟悉机械产品优先考虑)。 2、熟练使用质量控制5大工具、PDCA等常用质量控制和质量改进工具、熟悉IATF16949。 3、三年以上质量工程师经验。
工作职责Responsibility: 售后索赔处理CUSTOMER CLAIM HANDLING 50% 1.Log on OE customer portal site regularly, check the claims, make analysis and give response. 定期登录主机客户门户网站,查看索赔情况,进行分析并给出回应。2.Inspect returned products, analyze the failure reason and issue report. For quality issues, inform functional department or other Firestone plant for improvement. 检查退货产品,分析故障原因并出具报告。对于质量问题,通知职能部门或其他Firestone工厂进行改进。 3.Make data analysis, monitor warranty levels to identify opportunities for improvement.分析数据,监控索赔水平以发现改进的机会。 4.Visit end user customers or OEs to understand the quality issues at first hand and explain causes and corrective actions.必要时拜访终端用户或主机客户,了解质量问题的一手信息,进行分析并给出纠正措施。 质量体系管理QMS MANAGEMENT 20% 5.Maintain and improve the Quality Management System, conducts or participates in internal audit. 维护和改进质量管理体系,完成或参与内部审核。 6.Participate in process audit, identify and work on continuous improvement opportunities. 参与过程审核,识别并努力实现持续改进的机会。 工厂质量管理Manufacturing QE tasks 20% 7.Works with production and/or other related departments to analyze quality issues and take corrective actions. 与生产和/或其他相关部门合作,分析质量问题并采取纠正措施。 8.Coordinate containment action with plant and customer locations when a reject condition calls for it. 当出现不合格品后,需要时与工厂和客户端协调采取围堵措施。 其它Other 10% 9.Manage or participate in designated special project. 管理或参与领导指定的特殊项目。 10.Identify and work on continuous improvement opportunities as a leader or teammember.
1. Develop, implement, deploy and manage Control Plans to ensure the reliability of the processes and product.
2. Ensure that all applicable standards of quality are known, understood, implemented and are aligned to meet customer specific requirements.
3. Sets and monitors SPC data to ensure delivery of consistent quality from suppliers or to customers.
4. Leads and follows-up responds to customer concerns with regards to quality.
5. Plans and coordinates the preparation and submission of PPAP documents.
6. Participate in the checking fixture and holding fixture buyoff.
7. Assists with PFMEAs and APQP activities.
8. Participate in the APQP gate reviews, technical reviews etc. and report on the status of plant activities.
9. Leads and follows-up the PPAP document checklist.
10. Maintain Lessons learned data bases to provide feedback for projects and processes.
11. Assists in the development of standardized work processes and process improvements.
12. Leads and follows-up with execution and timing of the pre-production build quality requirements.
13. Sets standards for determining non-conforming materials and scrap review.
14. Establish a robust corrective process throughout the product delivery process;
15. Initiate action to prevent the occurrence of product non-conformity and system deficiency;
16.Seek opportunities for continuous improvement through the application of lean manufacturing techniques;
17. Conducts root cause analysis for any failure at customer side, and assist responsible department to define preventive
岗位职责:1.阀门及零部件维修、制造过程中的质量检验、质量分析及质量控制;2.质量工艺流程的管理及优化改进;3.建立实施并不断完善公司的产品质量管理体系;4.协助部门主管推进质检部的日常工作;任职要求:1、专科及以上学历;30-45岁;2、机械类相关专业,可适应出差;3、阀门行业或质量管理相关工作经验10年左右;4、熟悉GB9001质量管理体系;5、对阀门制造质量检验流程及质量控制流程熟悉;6、熟练掌握常用阀门的验收标准,具有一定的现场施工管理经验;7、诚实、认真、有责任心,工作有条理,善于总结和改善; 年龄要求:30-45岁 职能类别:质量管理/测试工程师(QA/QC工程师) 关键字:质量控制阀门行业质量检验质量管理体系质量控制流程质量管理
工作职责:
1.准备和执行对供应商的流程和系统审计
2.确定并监督供应商的优化措施
3.为供应商组织和实施流程发布
4.持续改进采购部件质量和供应商流程
5.积极参与供应商管理,评估、发展和支持供应商遵守要求的情况
6.定期监测供应商评估过程中与供应商相关的关键数据和标准,并跟踪改进措施
7.谈判、跟踪和管理质量保证协议
8.启动并检查供应商质量流程的有效性
9.为供应商制定质量理念
10.进一步发展供应商的质量管理体系
11.在考虑内部/客户质量要求的情况下,与供应商一起提前进行质量规划
12.确保与供应商商定的产品和流程质量
13.参与根本原因分析和确定纠正措施
14.8D - 措施的合理性检查
任职资格:
1.自动化、工业工程、机械工程相关专业统招本科以上学历
2.熟练掌握金属塑料加工领域的各种生产工艺,以及集成电路和中频产品中的电子元件生产工艺
3.在质量管理和采购方面有多年的专业经验
4.较强的沟通能力,英语可作为工作语言
5.熟悉 ISO 9001、ISO 14001 和 ISO 50001 质量管理标准
6.熟悉质量管理方法(PPAP、APQP、MSA、SPC、FMEA 等)
7.强烈的解决方案和行动导向以及团队合作能力
8.良好的分析能力
9.愿意为完成既定任务而出差
1. 能够识别图纸,基本的公差标准要熟悉 2. 熟悉IATF16949
1、客诉问题分析与方案验证,闭环追踪落实
2、与售后共同完成客诉问题的处理解决
3、产品质量监控,收集客诉数据定期分析,参与质量改进
4、客诉会议的组织召开,定期报告客诉处理进度
1、负责单件总成检具/支架/在线测量等测量技术要求,设计评审,开发,终验收
2、对客户图纸和形位公差充分的解读与确认,提出存在的问题并与产品进行沟通
3、检验员进行检具检验管理和相关培训
4、检具MSA,日常修理和保养
5、负责相关检具文件的归档,如检具管理清单,检具图样,评估表,MSA,修理记录等
6、负责修订检具设计标准,并及时维护更新
7、对产品检具的设计及制造进行评审
8、负责日常检具的管理及质量问题的处理
9、对检具/支架问题进行汇总及跟踪
10、确保关键尺寸和关键特性得到充分识别和检测
11、新项目检具概念设计以及TR评审
12、其他领导委派的任务
任职要求:
1、大学理科、工程或相关专业本科以上学历
2、在汽车总装厂或零部件的一级或二级供应商企业里,3年以上质量工作经验
3、对材料、装配、冲压、焊接有较丰富的实际经验
4、熟悉IATF16949 /QS9000质量体系
5、具有APQP、PPAP、PFMEA、CONTROL PLAN、MSA、SPC及GD
免费求职
企业直招 不收取任何费用专业招聘
专人服务 入职速度快50%优质服务
24小时客服响应 快速解答今日招聘网是由滨兴科技运营的人才网,未经今日招聘网同意,不得转载本网站之所有招工招聘信息及作品
浙公网安备 33010802002895号 人力资源服务许可证 330108000033号 增值电信经营许可证 浙B2-20080178-14 出版物经营许可证 新出发滨字第0235号 浙B2-20080178-14
互联网违法和不良信息举报中心:0571-87774297 donemi@163.com