与今日招聘企业随时沟通
与今日招聘企业随时沟通
Mission/Position Headline 概述: Responsible for process creation, maintenance and control/负责生产工艺的创建维护和控 制 Ensure the required product quality/ 确保产品质量 Contribute productivity including minimize excess cost / 致力于生产效率的提高,包括不 断减少额外成本。 Areas ofResponsibilties 职责范围: Responsible to realize the design and develop outputs in production, including creating operation specification, validation and verification of production process, etc. / 负责将产品 设计或优化变更转移至生产过程,并负责验证和确认等相关过程 Analysis defective parts and trouble shooting for failures in production line, report and actions follow up / 负责分析不合格品以及处理和报告 Set up and implement process control /建立过程控制程序 Optimize the process to obtain high quality for products, and ensure the on time delivery, as well. /优化流程以确保产品质量和发货需求 Improve process cability from cost and productivity aspects. / 从成本和生产率方面提高工 艺的可操作性 Continual monitoring the critical parameters to ensure the production quality is stable /持续 监控关键参数以确保产品质量稳定 Other tasks assigned by the supervior/经理指定的其他任务 任职要求: 1. More than 3 years production process engineering experience, with good process trouble shooting
Mission/
Position Headline 概
述:
Ensure the required product quality/ 确保产品质量
Contribute productivity including minimize excess cost / 致力于生产效率的提高,包括不
断减少额外成本。
Areas of
Responsibilties 职责
范围:
Responsible to realize the design and develop outputs in production, including creating
operation specification, validation and verification of production process, etc. / 负责将产品
的输入要求转换为生产知道的输出,并负责验证和确认相关过程
Analysis defective parts and troubleshooting for failures in production line, report and
actions follow up / 负责分析不合格品以及处理和报告
Set up and implement process control /建立过程控制程序
Optimize the process to obtain high quality for products, and ensure the on time delivery, as
well. /优化流程以确保产品质量和发货需求
As the interface between SCM and R
Mission/ Position Headline 概述: Responsible for process creation, maintenance and control/负责生产工艺的创建维护和控 制 Ensure the required product quality/ 确保产品质量 Contribute productivity including minimize excess cost / 致力于生产效率的提高,包括不 断减少额外成本。 Areas of Responsibilties 职责范围: Responsible to realize the design and develop outputs in production, including creating operation specification, validation and verification of production process, etc. / 负责将产品 设计或优化变更转移至生产过程,并负责验证和确认等相关过程 Analysis defective parts and trouble shooting for failures in production line, report and actions follow up / 负责分析不合格品以及处理和报告 Set up and implement process control /建立过程控制程序 Optimize the process to obtain high quality for products, and ensure the on time delivery, as well. /优化流程以确保产品质量和发货需求 Improve process cability from cost and productivity aspects. / 从成本和生产率方面提高工 艺的可操作性 Continual monitoring the critical parameters to ensure the production quality is stable /持续 监控关键参数以确保产品质量稳定 Other tasks assigned by the supervior/经理指定的其他任务 Dimension of Function/Volume 职能维度: Qualify and train the operators to fulfill the requirements Make a decision for failures ocuured in production line Contacts (internal/external 联 络(内/外部)): Internal: SCM PDE, SCM M, LOG, PLM, QM External: Customers, suppliers, auditors and authorities and related government function Experience 经验 1. More than 3 years production process engineering experience, with good process trouble shooting
岗位职责: 1、负责ERP系统产品BOM的创建、维护工作 2、负责维护量产产品作业指导书等工艺性文件 3、负责量产产品标准工时的核定、优化 4、负责量产产品工艺性提升,产品制程问题改善 5、负责特殊订单评审工作 6、负责PCN变更相关工作 岗位要求: 1、熟练使用ERP系统 2、会使用CAD软件、solidworks软件 3、从事I类/Ⅱ类有源医疗器械产品工艺相关工作2年及以上 4、动手能力强、能看懂机械图纸,对机械设计、配合公差有一定了解 5、有医疗器械内审员资格证者优先
职责描述: 1、负责新产品的SMT导入到试产跟进工作(设计评估、钢网制作、治具制作、试产报告输出、PFMEA文件制作) 2、负责SMT新工艺研究、新材料认证。 3、负责量产项目不良分析和改善。 4、负责客诉异常品分析,并输出8D改善报告。 5、负责SMT文件制定、修改后完善。 任职要求: 1、 有SIP产品SMT工艺优先。 2、 接受过QCC、黄带、绿带等精益相关培训。 3、 接受过ISO9001、IATF16949等体系相关培训。 4、 本科学历、2年以上工作经验。
Mission/Position Headline 概述:
Responsible for process creation, maintenance and control/负责生产工艺的创建维护和控
制
Ensure the required product quality/ 确保产品质量
Contribute productivity including minimize excess cost / 致力于生产效率的提高,包括不
断减少额外成本。
Areas ofResponsibilties 职责范围:
Responsible to realize the design and develop outputs in production, including creating
operation specification, validation and verification of production process, etc. / 负责将产品
设计或优化变更转移至生产过程,并负责验证和确认等相关过程
Analysis defective parts and trouble shooting for failures in production line, report and
actions follow up / 负责分析不合格品以及处理和报告
Set up and implement process control /建立过程控制程序
Optimize the process to obtain high quality for products, and ensure the on time delivery, as
well. /优化流程以确保产品质量和发货需求
Improve process cability from cost and productivity aspects. / 从成本和生产率方面提高工
艺的可操作性
Continual monitoring the critical parameters to ensure the production quality is stable /持续
监控关键参数以确保产品质量稳定
Other tasks assigned by the supervior/经理指定的其他任务
任职要求:
1. More than 3 years production process engineering experience, with good process trouble shooting
Mission/Position Headline 概述: Ensure the required product quality/ 确保产品质量 Contribute productivity including minimize excess cost / 致力于生产效率的提高,包括不断减少额外成本。 Areas ofResponsibilties 职责范围: 1.Responsible to realize the design and develop outputs in production, including creating operation specification, validation and verification of production process, etc. / 负责将产品的输入要求转换为生产知道的输出,并负责验证和确认相关过程 2.Analysis defective parts and troubleshooting for failures in production line, report and actions follow up / 负责分析不合格品以及处理和报告 3.Set up and implement process control /建立过程控制程序 4.Optimize the process to obtain high quality for products, and ensure the on time delivery, as well. /优化流程以确保产品质量和发货需求 5.As the interface between SCM and R
- Injection molding process development for new connector products - Problem solving for connector series production - Injection molding machine selection for different product class - Injection molding machine release and management - Centeral granulate suplier system management - Create standards/documents: Operation Instruction, AM, 5S instruction, HSE instruction, Quality alert etc. - Review
Mission/
Position Headline 概
述:
Responsible for process creation, maintenance and control/负责生产工艺的创建维护和控
制
Ensure the required product quality/ 确保产品质量
Contribute productivity including minimize excess cost / 致力于生产效率的提高,包括不
断减少额外成本。
Areas of
Responsibilties 职责
范围:
Responsible to realize the design and develop outputs in production, including creating
operation specification, validation and verification of production process, etc. / 负责将产品
设计或优化变更转移至生产过程,并负责验证和确认等相关过程
Analysis defective parts and trouble shooting for failures in production line, report and
actions follow up / 负责分析不合格品以及处理和报告
Set up and implement process control /建立过程控制程序
Optimize the process to obtain high quality for products, and ensure the on time delivery, as
well. /优化流程以确保产品质量和发货需求
Improve process cability from cost and productivity aspects. / 从成本和生产率方面提高工
艺的可操作性
Continual monitoring the critical parameters to ensure the production quality is stable /持续
监控关键参数以确保产品质量稳定
Other tasks assigned by the supervior/经理指定的其他任务
任职要求:
1. More than 3 years production process engineering experience, with good process trouble shooting
Process data acquisition for grinding processes.
Definition of process parameters and machine capability study for CRI/CRIN, body, nozzle, pump component and EAC rotor grinding processes according to RBCD/TEF DP.
Preparation and maintenance of process data sheets for grinding processes.
Preparation of grinding process releases.
Development, leading and implementation of improvement activities for output increase, scrap reduction and process capability increase of grinding processes in cooperation with MOE.
Knowledge exchange and improvement with leadplants.
IPN cooperation by CoC participation regarding grinding processes.
职位要求:
Bachelor degree in engineering, production/automation or physics
Very good English skills (B2 or better) in oral communication as well as reading/writing
German language skills helpful, but not mandatory
Systematical and analytical thinking.
Grinding process knowledge.
Machine design and machine components requested.
Team working skills.
博世集团网上招聘数据处理同意声明
个人信息及目的:你的如下个人信息将被处理并用于招聘:姓名、电子邮箱、电话号码、所在地区、经验和教育信息、简历等应聘者自主提交的附件信息、证件号、职位、部门、计划入职日期、第一次劳动合同持续时间、工作地点、月薪、年薪、浮动奖金比例、餐贴、车贴。
博世将依据相关的数据保护法规,在全球范围内对您的数据进行保密。招聘流程中,您的个人信息只有在必须时才会被提供给博世以外的第三方机构(如代理机构)。博世精心挑选了第三方机构并与之签订了保密合同。博世采取了种种保密措施以保护您的数据,确保其不会遭受操纵、丢失、破坏、未经授权的访问或泄漏。我们的安全措施将随着新技术的应用而不断升级。您的本地浏览器和我们的人才招募系统之间的数据传输通过https加密。
特定职位申请:申请博世集团的职位就意味着您将自己的个人信息提供给博世集团旗下相应的法律实体(具体请见博世集团法人清单)。请注意,若有任何文件或资料变更,请在所有申请书里一并变更。人力资源部门的员工可能与您联系,询问您是否同意将您的求职申请转向博世集团内部另一合适职位。如果您申请了特定职位,那么只有在您同意的情况下,博世才会将您的求职申请转向另一职位。
您可以随时撤回求职申请,博世将根据相关法律删除您的个人信息。与您的申请相关的所有资料将被保留至24个月。若申请美国职位,博世依法保留三年。
您的权利:若您希望停止向博世提供您的个人信息,可联系我们或通过博世网上招聘数据隐私声明中的BKMS系统提出申请。您可以在SmartRecruiters平台查阅和修改您的简历。您对您的个人信息的处理享有知情权、决定权,您有权限制或者拒绝我们对您的个人信息进行处理。您还可以更正、补充您的个人信息。
跨境传输:为了实现前述目的,我们所收集的您的个人信息可能会在多个国家或地区间进行跨境转移,例如德国、新加坡。
德国:罗伯特-博世有限公司(德国格宁根市罗伯特博世广场1号(Robert-Bosch-Platz 1, Gerlingen-Schillerhohe, Germany,邮编:70839),用于集团统一招聘管理(博世中国与数据接收方均基于该目的开展数据出境活动;
英国:SmartRecruiters(英国伯克郡温莎亚瑟路圣斯蒂芬大厦 邮政区码: SL4 1RU),用于招聘、后期交流联系及分享职位/活动信息、潜在人才社区邀请。
您可通过上述联系方式依法向境外接收方行使您在个人信息处理活动中的权利。
存储您的个人信息:我们将仅在为实现目的必要的范围内以及法律法规要求的时间内保留您的个人信息。
雇佣:被雇佣后,您提供的数据将被从当前招聘系统转移至职位所属公司的人力资源管理系统。
本政策更新:我们将通过【邮件通知】的方式提供经更新的本政策,请您及时查看以获得更新。
联系方式:
请通过访问博世中国官方主页:博世在中国
岗位职责: 1、根据公司的热处理及焊接工艺装备、产品特点等要求采用合理的热处理、焊接工艺、工装和 设备,制定合理的工艺,编制工艺文件和工装设计,满足产品质量要求; 2、负责将产品 设计或优化变更转移至生产过程,并负责验证和确认等相关过程 3、负责分析不合格品以及处理和报告 4、建立过程控制程序 5、优化流程以确保产品质量和发货需求 6、 从成本和生产率方面提高工 艺的可操作性 7、持续监控关键参数以确保产品质量稳定 8、经理指定的其他任务 岗位要求: 1、3 年以上焊接及工艺工程经验,良好的分析和解决问题能力 2、熟悉常用焊接过程(氢气焊、氩弧焊、钎焊,激光焊…)、制造过程及操作规程;熟悉常用金属材料的 热处理及焊接特性及要求 3、成长性思维,良好的主人翁精神,善于合作以及结果导向 4、良好的英语读写及沟通能力 5、有国际焊接工程师认证的优先
岗位要求:
1、 根据设计工程师提供的三维图纸,完成机械装配作业指导书及装备流程图的编制及更新;
2、设计装配辅助工装夹具、测试辅助工装夹具;
3、负责根据生产反馈的问题进行工艺性的优化,与质量部门密切合作,及时处理 工艺质量问题;
4、负责对设计工程师三维图纸存在的问题进行提出,并提出改善建议;
5、负责对现场装配进行工艺纪律检查,并提出改善建议;
6、完成上级交办的其他工作。
任职要求:
1、机械、机电一体化、自动化相关专业;
2、可独立设计工装夹具;
3、能简单操作一门三维软件及一门二维软件,熟悉使用基本办公软件;
6、有现场装配工艺文件编制经验者优先;
7、较强的沟通能力,工作积极主动,有较强的责任心,良好的团队协作精神。
岗位要求:
1、从事过5年以上压力容器、钢结构类产品的制造工作;
2、熟悉ASME 、GB的评定标准,能独立编制焊接工艺指导书,完成焊接工艺评定工作;
3、能编制冷作工艺流程卡,确保工艺文件的可行性,确保焊接工艺的适用性;
4、熟悉气保焊、焊条电弧焊、氩弧焊、埋弧焊等焊接方法的工艺方案及工艺参数;
5、熟悉各种材料的焊接性能,如铸铁、碳钢、奥氏体不锈钢、马氏体不锈钢、双相不锈钢等;
6、熟悉各种焊接设备、焊接切割设备及焊接辅助设备的基本运用;
7、能熟练使用CAD绘图工具,并能对图纸进行分解排版下料,能使用三维软件优先;
8、对产品铆焊制作的工时有相关经验,能协助营业部门,对前期投标报价进行冷作件的工时预算。
工作内容描述:
1、编制冷作件的工艺流程卡并核算制作工时及焊材使用量;
2、根据设计冷作件图纸,绘制下料图;
3、根据不同材料的焊接性能,编制焊接工艺指导书,完成焊接工艺评定工作;
4、协助营业部门,对前期投标项目进行冷作件工时核算;
5、协助设计对冷作件图纸进行结构优化;
6、解决生产现场产生的焊接质量问题及铸造不良品的修复问题。
1、根据图纸及技术准备计划,编制各类装配及冷作工艺文件;2、完成产品装配及冷作工时核算3、根据工厂生产需求,参与产品现场技术服务,解决制造过程中的装配及冷作工艺问题;4、 根据公司技术发展需求,参与技术引进、工艺优化、新产品研制,新技术开发等工作。任职要求:1、有5年以上制造、技术或服务装配及冷作工作经验,有挤塑机行业工作经验者优先考虑录用;2、 能使用Auto CAD或三维软件; 3、 熟悉使用OFFCE办公软件,独立完成产品工艺文件要求;4、 有较好的语言沟通和协调能力。 年龄要求:28-45岁 职能类别:装配工程师/技师
1、根据图纸及技术准备计划,编制各类装配及冷作工艺文件;
2、完成机加工工艺产及工时核算
3、根据工厂生产需求,参与产品现场技术服务,解决机加工制造过程中的工艺问题;
4、 根据公司技术发展需求,参与技术引进、工艺优化、新产品研制,新技术开发等工作。
任职要求:
1、有5年以上制造、技术或服务机加工工艺工作经验,有挤塑机行业工作经验者优先考虑录用;
2、 能使用Auto CAD或三维软件;
3、 熟悉使用OFFCE办公软件,独立完成产品工艺文件要求;
4、 有较好的语言沟通和协调能力。
免费求职
企业直招 不收取任何费用专业招聘
专人服务 入职速度快50%优质服务
24小时客服响应 快速解答今日招聘网是由滨兴科技运营的人才网,未经今日招聘网同意,不得转载本网站之所有招工招聘信息及作品
浙公网安备 33010802002895号 人力资源服务许可证 330108000033号 增值电信经营许可证 浙B2-20080178-14 出版物经营许可证 新出发滨字第0235号 浙B2-20080178-14
互联网违法和不良信息举报中心:0571-87774297 donemi@163.com